Hauhinco 0101 serien retningsventiler, Face mounting - Sete 2/2

Hauhinco retningsventiler
  • Directly controlled ball seat valve, hermetically sealed in closed position, zero leakage from P → A
  • All parts are of corrosion resistant materials, wearing parts easily accessed and quickly replaced
  • Robust heavy-duty magnet with double bearings and surface protection against corrosion, square plug can be turned through 360° in 90° steps
  • All internal parts are protected from dust, dirt and leaking water by seals between valv - body, and actuator-lever housing
  • Actuator-lever and magnet tappet are clearly visible through the sight glass - By removing the sight glass it it possible to operate the valve manually
  • The valve can be retrofitted with a proximity switch and a manual actuator (latching)
  • A filter-orifice, which forms part of the P-connection, prevents intrusion of larger dirt particles
       
Kontakt Hydex vedrørende Hauhinco 0101 serien retningsventiler

Type     2/2 Way Ball Seat Valve
Designation 2/2 way ball seat valve, direct controlled
Design Face mounting
Fitting position  As required
Nominal size DN3 / DN6 / DN10
Operating pressure 320 bar / 500 bar/ 700 bar
Max flow rate 9 l/min / 16 l/min / 38 l/min (with orifice)
13 l/min / 40 l/min / 90 l/min (without orifice)
Flow direction P → A
Medium Water, HFA, HFB, HFC, Mineral oil, other pressure media on request
Ambient temperature Max 50°
Viscosity range 0,5...4,0 mm²/s (Neutral fluids)
For mer informasjon Klikk her --- Way seat valves --- Technical data 2/2 (1,7 Mb)

Kontakt Hydex vedrørende Hauhinco 0101 serien retningsventiler 
  
 
Page rendered: 29.12.2022 03:12:34
OXX.Authorization.User.Username: Hydex_Systemhydraulikk_anonym (NO)