Tank-top mounted in-line filters with a suction connection on the clean-side
For hydraulic circuits which are equiped with minimum 2 feed pumps (2 hydraulic circuits)
Suitable for a working pressure up to 10 bar
Pressure peaks will be absorbed by a sufficient margin of safety
Directly mounted to the reservoir and connected to the return-line
Filter elements as fine as 5 μm(c) microns are available; finer filter elements on request
Can be used for petroleum-based fluids, HW emulsions, water glycols, most synthetic fluids and lubrication fluids
Stable elements
Excellent filtration capabilities
High dirt retaining capacity
Long service life
Easy to service.

Type		Return Line Filter with Suction Connection
Temperature range		-10°C to +80°C (for a short time +100°C)
Operating medium		Mineral oil, other media on request
Max. operating pressure		10 bar
Opening pressure by-pass valve		2,5 bar
Opening pressure preload valve		0,5 bar
Opening pressure suction valve		0,05 bar
Connection		G 1¼ according to DIN 3852, T2
Housing material		Al-casting, polyamide 6
Sealing material		Nitrile (NBR) or Viton (FPM), other materials on request
Installation position		Vertical
Volume tank		2,8 l
Classification		Pressure Equipment Directive 97/23/EC for mineral oil (fluid group 2), Article 3, Para. 3 ATEX Directive 94/9/EC according to specific application
For mer informasjon		Datablad --- Oversikt --- Brosjyre

		Internormen TRS 101 Returfilter - Med suction connection				Internormen TRS 625 Returfilter - Med suction connection

						Oversikt Internormen returfilter -Med suction connection