The ADN600 is a valve amplifier for actuation of proportional valves, primarily in mobile driven machines
The device is can be operated at supply voltages from 11 to 28V dc, changeover from 24V supplies to 12V operating voltage occurs automatically by means of the built-in supply-voltage monitor
Switchover occurs when voltage falls below 16V
Device is normally accommodated in a plastic or metal housing
Protection against overcurrent is provided by means of a built-in resettable fuse (PTC thermistor)
Connection is accomplished via a 12-pole spring terminal strip, one earthing (grounding) terminal being available for screening of each of the two cables
Actuation of the valve is effected primarily by means of a joystick, input voltage being 0.5V—2.5V—4.5V 2.5V (zero point)
Parameter setting is accomplished via a coded rotary switch in combination with a button, a built-in potentiometer and a LED
Equipped with an Enable input.

Type		Valve amplifier
Use		Actuation of proportional valves, primarily in mobile driven machines
Supply voltage		12...28V
Ramp seting		0.25 —12 s, separately adjustable for the (A) and (B) magnets
Dither frequency adjustable		50—150 Hz
Temperature range		-40°C...+85°C
Fuse		Resettable fuse 2.5 Amp
PWM frequency		4.8KHz; dither is modulated on
For mer informasjon		Klikk her --- Datablad