Cromax 280X hårdkrommet stempelstang

Sylindermateriale 
  • Cromax 280X is based on a low carbon, microalloyed steel combining high strength with excellent machinability and weldability
  • For 90 mm, yield and tensile strength are 20% higher than is normal for hard-chrome bars based on low-carbon weldable steel
  • In comparison with standard products based on grade 20MnV6, the superior properties profile of Cromax 280X offers a number of potential advantages in the design and manufacture of fluid-power cylinders, not the least of which is the possibility to downsize piston rods without loss of load-bearing capacity, thereby reducing not only weight but also cost
Kontakt Hydex vedrørende Cromax 280X hårdkrommede stempelstenger

Type    Hårdkrommet stempelstang
Chrome layer Dimensjon >20 mm: Minimum 20 μm
Dimensjon <20 mm: 15 μm
Surface roughness Ra < 0.2 μm (normalt 0,05-0,15 μm)
Ry (ISO)/Rmax (DIN) < 1.6 μm (normalt 0,4-1,2 μm)
Straightness Dimensjon < 30 mm: Max avvik 0,1 mm/0,5 m
Dimensjon > 30 mm: Max avvik 0,1 mm/1,0 m
Weldability Cromax 280X har utmerket sveisbarhet
For Ø>90 mm anbefales dog en arbeidstemperatur på 150-200ºC
Anbefalt tilsatsmateriale ved metallbuesveising er OK 48.00/38.84
Ved gassmetallsveising anbefales OK 12.64 med beskyttelsesgass 80% Ar og 20% CO2
Delivery lengths Standardlengde: 6,1+0,1/-0 m
Lengde for Ø>18 mm: 5,2+0,2/-0 m
Lengde for Ø=40-80 mm: 7,6+0,1/-0 m
Produsenter Ovako, Heléns, Stelmi, m.fl.

Kontakt Hydex vedrørende Cromax 280X hårdkrommede stempelstenger

 
Page rendered: 29.12.2022 02:43:41
OXX.Authorization.User.Username: Hydex_SylinderTeknikk_anonym (NO)